Energy From Thorium Discussion Forum
http://energyfromthorium.com/forum/

heat- and radiation-resistant logic
http://energyfromthorium.com/forum/viewtopic.php?f=4&t=3698
Page 1 of 1

Author:  vanzandtj [ Jun 18, 2012 12:05 pm ]
Post subject:  heat- and radiation-resistant logic

A new form of logic:
Quote:
University of Utah engineers designed microscopic mechanical devices that withstand intense radiation and heat, so they can be used in circuits for robots and computers exposed to radiation in space, damaged nuclear power plants or nuclear attack.
Quote:
Three times, the researchers lowered the devices for two hours into the core of the university’s 90-kilowatt TRIGA research reactor, with wires extending to the control room so the researchers could monitor their operation. The logic gates did not fail.
http://unews.utah.edu/news_releases/radiation-resistant-circuits-from-mechanical-parts/

This logic is much larger and slower than semiconductor electronics. But surely it would be useful in monitoring and controlling the on-line processing of the hot and radioactive reactor salt!

Author:  Owen T [ Jun 18, 2012 1:04 pm ]
Post subject:  Re: heat- and radiation-resistant logic

vanzandtj wrote:
A new form of logic:
Quote:
University of Utah engineers designed microscopic mechanical devices that withstand intense radiation and heat, so they can be used in circuits for robots and computers exposed to radiation in space, damaged nuclear power plants or nuclear attack.
Quote:
Three times, the researchers lowered the devices for two hours into the core of the university’s 90-kilowatt TRIGA research reactor, with wires extending to the control room so the researchers could monitor their operation. The logic gates did not fail.
http://unews.utah.edu/news_releases/radiation-resistant-circuits-from-mechanical-parts/

This logic is much larger and slower than semiconductor electronics. But surely it would be useful in monitoring and controlling the on-line processing of the hot and radioactive reactor salt!


This stuff has no moving parts and IIRC has been in continuous use in high-radiation environments for decades.
Attachment:
fluidamps2.jpg
fluidamps2.jpg [ 84.38 KiB | Viewed 4229 times ]

Author:  rgvandewalker [ Aug 03, 2016 12:13 pm ]
Post subject:  Re: heat- and radiation-resistant logic

My brother designed a series of plastic molds for fluidic logic. This was thirty or more years ago.
They used low-pressure compressed air, and were interconnected by rubber hose.
Indicators were little balls of fluff in transparent tubes.
The technology can do anything electronics does, maybe a bit slower.
I think if it had been discovered in 1820, Babbage might have used it instead of mechanisms.

https://en.wikipedia.org/wiki/Fluidics

Author:  HolgerNarrog [ Aug 05, 2016 1:10 am ]
Post subject:  Re: heat- and radiation-resistant logic

Robots and remote controlled equipment could be in general a big opportunity for nuclear. It could work in high radioactive environments as doing maintenance close to a running reactors, work with contaminated structures (Fukushima) or reprocessing units.

The bad thing is that electronics gets smaller and smaller and even a few neutrons and gamma can disturb it. I woud not wonder if electronics becomes more and more sensitive to the radiation in aircrafts (cosmic radiation) flying in high altitudes.

Fluid logic and mechanical computers are an alternative. The bad thing is that no one else than nuclear and space technology (high cosmic radiation) needs it.

Does anyone know if NASA is working on the topic as well?
Is someone working on electronics resistant to radioactivity?

Author:  KitemanSA [ Aug 05, 2016 2:41 pm ]
Post subject:  Re: heat- and radiation-resistant logic

Solid state circuitry also works when you have transisters the size of the old 80286 or larger. The bigger the feature, the less sensitive. The Japanese have the problem that they are trying to fit VERY capable robots thru very small openings.

Author:  rgvandewalker [ Apr 19, 2017 10:37 am ]
Post subject:  Re: heat- and radiation-resistant logic

Space-rated electronics are well-known. These resist cosmic rays, even solar storms.

Author:  E Ireland [ Apr 19, 2017 11:24 am ]
Post subject:  Re: heat- and radiation-resistant logic

They are also garbage compared to newer, less radiation-resistant, electronics.

Author:  Asteroza [ Apr 19, 2017 9:32 pm ]
Post subject:  Re: heat- and radiation-resistant logic

Space rated CPU's (not necessarily those mixed hard/soft core FPGA rigs) are also around 486 class in terms of capability, due to process size (so gates are more rad hard), and processor design is still in the realm of human verifiable (gate count)

Author:  rgvandewalker [ Jul 31, 2017 3:35 pm ]
Post subject:  Re: heat- and radiation-resistant logic

Vacuum-channel transistors are the same size as FETs, resist radiation (they are "tubes", scaled-down) don't need crystalline semiconductors, and run 10x faster.
And also, they don't need plate heaters or hard vacuums.
https://www.nasa.gov/ames-partnerships/technology/technology-opportunity-nanostructure-based-vacuum-channel-transistor

Author:  Cyril R [ Aug 01, 2017 8:10 am ]
Post subject:  Re: heat- and radiation-resistant logic

In most cases (certainly for stationary apps) it is more practical to shield the electronics rather than try to harden them.

Author:  rgvandewalker [ Aug 07, 2017 7:11 pm ]
Post subject:  Re: heat- and radiation-resistant logic

Cyril, you're totally right. Even in a space-rated reactor, the controls would probably be conventional electronics on the shadow side of a shadow shield. Maybe the structural beam holding the reactor would shield the electronics, too.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/